CBCDX - POLYSHEEN WHITE & WTB, 055-0001N
- MSDS: CBCDX
- Manufacturer: DECRATREND PAINT CORP
- Product Name: POLYSHEEN WHITE & WTB, 055-0001N
- National Stock Number: 8010-00N044914
Product Identification
Product ID:POLYSHEEN WHITE & WTB, 055-0001N
MSDS Date:01/01/1992
FSC:8010
NIIN:00N044914
MSDS Number: CBCDX
Responsible Party
CITY OF INDUSTRY, CA 91746
US
Emergency Phone: 818-333-4592
Info Phone: 818-333-4592
Cage: 42590
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
2 @ 68F.
Fraction By Weight: 45%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: N/K
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 5%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <5%
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/M3 RDUST
COATING - 2.88 LBS/GAL (345
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXCESSIVE INHAL OF VAPS
CAN CAUSE NASAL & RESP IRRIT, WEAK, DIZZ, FATG, NAUS, HDCH & POSS
UNCON & EVEN ASPHY. SKIN CONT:PRLNG/RPTD CONT CAN CAUSE MOD IRRIT,
DEFAT, DERM. SKIN ABSORPTION:OR GANIC SOLVS ARE EASILY ABSORBED,
DRYING, REDNESS/DERM ARE SIGNS OF RPTD OVEREXP TO THEIR DEFAT
ACTION. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EYE CONT:CAN CAUSE SEV IRRIT, REDNESS,
TEARING & BLURRED VISION. INGEST:CAN CAUSE GI IRRIT, NAUS, VOMIT &
DIARR. ASPIR INTO LUNGS CAN CAUSE CHEM PNEUM WHICH CAN BE FATAL.
CHRONIC:PRLNG/RPTD E XPOS ABOVE TLV MAY RSLT IN PERM BRAIN &NERV
SYS DMG.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES:FLUSH IMMED W/LG AMTS OF WATER FOR AT LST 15 MINS. TAKE
TO MD FOR MED TREATMENT. SKIN:WASH AFFECTED AREAS W/SOAP & WATER.
REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT PERSISTS. INHAL:REMOVE TO
FRESH AIR. RESTORE BRTHG. TREAT SYMPTOMATICALLY. CONSULT MD.
INGEST:DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMIT.
CONSULT MD/POIS CTL CTR IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:102F,39C
Lower Limits:0.8%
Upper Limits:6%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DURING EMER CNDTNS OVEREXP TO DECOMP PRODS MAY CAUSE
IMMEDIATE OR DELAYED HLTH HAZARDS.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND & BE IGNITED BY HEAT, OPEN FLAME/OTHER IGNIT SOURCES. KEEP
CNTNRS TIGHTLY CLSD. ISOLATE FROM HEAT, SPKS, ELEC(SUPDAT)
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE, CONTAIN
OR ABSORB W/INERT MATERIALS (SAND, VERMICULITE, ETC). TRANSFER TO
CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS OR OTHER BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPERATURES, NEAR FIRE OR OPEN FLAME, OR OTHER IGNITION
SOURCES.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPOR & MIST, SUPPLIED AIR OR SELF CONTAINED BREATHING
APPARATUS.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL &/OR LOCAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR IMPERVIOUS CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE & WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ:EQUIPMENT & OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. EYE PROT:& FULL LENGTH FACESHIELD .
Chemical Properties
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC ON THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE OR FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.